COURIER HIGH SPEED MODEMS
ALLOWABLE VOICE/DATA SWITCH FUNCTIONS
Use Register S32 to set the voice/data switch for the function you desire. The default is S32=1⎯pressing the switch forces the modem off hook in Originate mode. Pressing the switch when you power on the modem causes it to perform a
NOTE: Some of the applications listed below require some sort of preconfiguration. Review the Chapter/Appendix referenced before using the Voice/Data switch function.
S32 Value | Voice/Data Switch Function | Related Command |
0 | Disabled | _ |
1 | Voice/Data⎯Originate Mode (Default*) | ATD (Appendix G) |
2 | Voice/Data⎯Answer Mode | ATA (Appendix G) |
3 | Redial Last Number | ATDL (Chapter 4) |
4 | Dial Number Stored at position 0 | ATDS0 (Chapter 4) |
5 | Auto Answer On/Off Toggle | ATS0=0 or 1 (Chapter 4) |
6 | Reset Modem | ATZ (Chapter 4) |
7 | Initiate Remote Digital Loopback | AT&T6, S16=8 |
|
| (Appendix H) |
8 | Busy Out Phone Line Toggle | _ |
9 | Execute Stored Command (Default*) | AT&ZC=s (Chapter 4, |
Appendix F, G)
*The modem is shipped from the factory set at S32=9. If a command string has been stored (&ZC=s), the modem executes the stored command string when the voice/data switch is pushed. If no command string is stored, the modem still reports that S32=9, but actually behaves as if it is set to S32=1, Originate mode.
Table G.1⎯S32 Functions
Additional Operations
