USRobotics V.34 AT %V=PWn Enter, AT I10 Enter, ATS53.0=1 &W Enter, AT S0=1 Enter, AT S0=0 Enter

COURIER HIGH SPEED MODEMS

Then assign the password as your autopass password. Enter the following command, where n is the number of the account you set up):

AT %V=PWn <Enter>

You can check to see that you've correctly set up your autopass password by typing the following command:

AT I10 <Enter>

Your autopass password appears in the right-hand column below FORCED AUTOPASS.

Once the autopass password is set, enable your Courier modem’s Dial Security with the following command:

ATS53.0=1 &W <Enter>

3.If Dialback is enabled at the host Courier site, set your modem to answer the host modem when it disconnects and dials back.

To set the modem to answer the Dialback call, set DIP switch 5 OFF and reset the modem (ATZ <Enter>).

Alternatively, type the following command:

AT S0=1 <Enter>

4.Call the host modem.

5.When the call is completed, if you want to disable auto answer, do one of the following:

∙Set DIP switch 5 ON and reset the modem (ATZ<Enter>).

∙Type the following command:

AT S0=0 <Enter>

Dial Security D-9