COURIER HIGH SPEED MODEMS
The function of the voice/data switch is determined by the set- ting of Register S32, as described in Appendix G. Set the voice/data switch function to execute stored command string by setting Register S32 to 9 with the following command:
ATS32=9 <Enter>
Note that you can reset the voice/data switch at any time to one of the other available functions. Additionally, you can overwrite the stored command string with a new one at any time.
Once you've stored your command string and set Register S32, all you need to do is press the voice/data switch whenever you want the command string executed.
&Zn=s This command stores up to ten numbers, where n is the position 0−9 in nonvolatile memory, and s is the phone number string. The
AT &Z2=555-6789 <Enter>
Do not include modem settings in the &Zn string. If the call requires a special setting, insert it in the command string before the DSn command. In the following example, &M0 (no error control) is inserted before the Dial command:
AT&M0 DS2 <Enter>
NOTE: The &Zn=s command functions differently when Dial Security is enabled. See Appendix D for more information.
&Zn? Display the phone number stored in NVRAM at position n (n = 0−9).
