USRobotics V.34 user manual Register Default Function

COURIER HIGH SPEED MODEMS

Register	Default	Function
S0	See DIP	Sets the number of rings on which to
	Switch 5	answer when in Auto Answer mode. S0=0
		disables Auto Answer, the same as DIP
		switch 5 ON (factory setting). S0=1
		enables Auto Answer and the modem
		answers on the first ring.
		NOTE: If DIP switch 5 is OFF and S0=0,
		Auto Answer remains disabled.
S1	0	Counts and stores the number of rings
		from an incoming call.
S2	43	Stores the ASCII decimal code for the
		escape code character. Default character is
		“+”. A value of 128-255 disables the
		escape code.
S3	13	Stores the ASCII decimal code for the
		Carriage Return character. Valid range is
		0−127.
S4	10	Stores the ASCII decimal code for the Line
		Feed character. Valid range is 0−127.
S5	8	Stores the ASCII decimal code for the
		Backspace character. A value of 128-255
		disables the Backspace key's delete
		function.
S6	2	Sets the number of seconds the modem
		waits before dialing. If set to X2, X4, X6,
		or X7, the modem dials as soon as it
		detects a dial tone (fast dials). If there is
		no dial tone, the modem observes the
		normal S6 timeout.
S7	60	Sets the number of seconds the modem
		waits for a carrier. May be set for much
		longer duration if, for example, the
		modem is originating an international
		connection.

B-16 Summaries and Tables