COURIER HIGH SPEED MODEMS
93/CONNECT 21600/V32 | 96/CONNECT 21600/ARQ/V32 |
97/CONNECT 21600/VFC | 98/CONNECT 21600/ARQ/VFC |
101/CONNECT 24000/VFC | 102/CONNECT 24000/ARQ/VFC |
105/CONNECT 26400/VFC | 106/CONNECT 26400/ARQ/VFC |
109/CONNECT 28800/VFC | 110/CONNECT 28800/ARQ/VFC |
139/CONNECT 14400/VFC | 141/CONNECT 14400/ARQ/VFC |
143/CONNECT 16800/VFC | 145/CONNECT 16800/ARQ/VFC |
147/CONNECT 19200/VFC | 149/CONNECT 19200/ARQ/VFC |
111/CONNECT 21600/V34 | 112/CONNECT 21600/ARQ/V34 |
113/CONNECT 24000/V34 | 114/CONNECT 24000/ARQ/V34 |
115/CONNECT 26400/V34 | 116/CONNECT 26400/ARQ/V34 |
117/CONNECT 28800/V34 | 118/CONNECT 28800/ARQ/V34 |
120/CONNECT 2400/V34 | 122/CONNECT 2400/ARQ/V34 |
124/CONNECT 4800/V34 | 126/CONNECT 4800/ARQ/V34 |
128/CONNECT 7200/V34 | 130/CONNECT 7200/ARQ/V34 |
132/CONNECT 9600/V34 | 134/CONNECT 9600/ARQ/V34 |
136/CONNECT 12000/V34 | 138/CONNECT 12000/ARQ/V34 |
140/CONNECT 14400/V34 | 142/CONNECT 14400/ARQ/V34 |
144/CONNECT 16800/V34 | 146/CONNECT 16800/ARQ/V34 |
148/CONNECT 19200/V34 | 150/CONNECT 19200/ARQ/V34 |
&A3 Additional error control indicator (LAPM, HST, MNP, SYNC, or NONE) and data compression type (V42BIS or MNP5). Default. When the call is not under one of those protocols (and ARQ is not included in the result code), the modem reports either SYNC, indicating a syn- chronous connection, or NONE, for no protocol.
If the modems are using data compression, the type of compression, V42BIS or MNP5, is added to the result code. In the first of the following examples, the modems negotiated error control for the call (ARQ), used VFC modulation, are using the LAPM error control protocol, and are using V.42 bis compression.
CONNECT 28800/ARQ/VFC/LAPM/V42BIS [or MNP/MNP5] CONNECT 19200/ARQ/V32/LAPM/V42BIS [or MNP/MNP5] CONNECT 16800/ARQ/HST/HST/V42BIS [or MNP/MNP5] CONNECT 14400/ARQ/V32/LAPM/V42BIS [or MNP/MNP5] CONNECT 9600/ARQ/HST/CELLULAR/HST/V42BIS [or MNP5] CONNECT 9600/SYNC
CONNECT 2400/NONE
NOTE: Although these codes will return numeric identifiers, they are the same numeric identifiers used for &A2 result codes. If the modem is in Numeric mode (V0) and set to &A3, you will not be able to differentiate between &A2 and &A3 result codes. &A3 result codes may not be compatible with some software.
