USRobotics V.34 user manual Modem Settings Displays

COURIER HIGH SPEED MODEMS

Modem Settings Displays

On command, the modem displays its current settings, a handy way to check your transmission rate, S-Registers and other operational controls. The modem also displays the defaults stored in nonvolatile memory as well as its default configuration templates. See Chapter 6.

HELP Screens

The modem displays screens that summarize the command sets, Dial command options, and S-Register functions. See Chapter 6.

Bottom Panel Reference

Command summaries and other information are printed on the bottom of the modem case. A Dual In-Line Package (DIP) switch guide makes it easy to tailor the switch settings to your terminal or software requirements.

Dialing the Last-Dialed Number

The modem has a buffer that stores each dialed number until it is cleared by another Dial command. A few keystrokes cause the modem to redial the number in the buffer without your having to enter the number again. See the DL command in Appendix C.

Automated Redialing

You can put the modem into Repeat Mode to continuously redial if a previous dial attempt fails to connect. This is espe- cially useful in dialing services whose lines are often busy. See Chapter 4.

Quote Mode

Set the modem to Quote Mode if you want it to dial an alpha- betic acronym instead of a numeric number. See Chapter 4.

Features and Compatibility 1-5