COURIER HIGH SPEED MODEMS
Result Code | Meaning |
0/OK | Command has been executed. |
1/CONNECT | Connection with another modem; if set to X0, connection |
| may be between 300 and 28.8 bps; if X1 or higher, |
| connection is at 300 bps. |
2/RING | Incoming ring detected. |
3/NO CARRIER | Carrier detect has failed or carrier has been dropped due to |
| disconnect. |
4/ERROR | Command is invalid. |
5/CONNECT 1200 | Connection with another modem at 1200 bps. |
6/NO DIAL TONE | Dial tone not detected during the normal 2 seconds, set in |
| Register S6. |
7/BUSY | Busy signal detect; modem hangs up. |
8/NO ANSWER | After waiting 5 seconds for an answer, modem hangs up; |
| returned instead of NO CARRIER when the @ option is |
| used. |
10/CONNECT 2400 | Connection with another modem at 2400 bps. |
11/RINGING | The modem has dialed; remote phone line is ringing. |
12/VOICE | Voice answer at remote site; modem hangs up. |
13/CONNECT 9600 | Connection at reported rate. Same meaning for results of |
| 4800 (18), 7200 (20), 12K (21), 14.4K (25), 16.8K (43), 19.2K |
| (85), 21.6K (91), 24K (99), 26.4K (103), or 28.8K (107) |
Adaptive Dialing | The modem attempts to use tone dialing and, if that |
| doesn't work, reverts to rotary dialing. |
Wait for Another | The modem continues dialing as soon as it detects |
Dial Tone (W) | another dial tone. See the dial options earlier in this |
| chapter. |
Wait for an | The modem continues dialing when it detects 5 seconds of |
Answer (@) | silence on the line. See the dial options earlier in this |
| chapter. |
Fast Dial | The modem dials immediately on |
| of waiting the normal 2 seconds set in Register S6. |
