TRENDnet BRF114 Defining your own Virtual Servers, Buttons, Defaults, Disable All, Update, Delete

TW100-BRF114 User’s Guide

Buttons

Defaults	This will delete any Servers you have defined, and set the pre-
	defined Servers to use their default port numbers.
Disable All	This will cause the "Enable" setting of all Virtual Servers to be set
	OFF.
Add	Add a new entry to the Virtual Server list, using the data shown in
	the "Properties" area on screen. The entry selected in the list is
	ignored, and has no effect.
Update	Update the current Virtual Server entry, using the data shown in the
	"Properties" area on screen.
Delete	Delete the current Virtual Server entry. Note that the pre-defined
	Servers can not be deleted. Only Servers you have defined yourself
	can be deleted.
Clear Form	Clear all data from the "Properties" area, ready for input of a new
	Virtual Server entry.
		For each entry, the PC must be running the
		appropriate Server software.

Defining your own Virtual Servers

If the type of Server you wish to use is not listed on the Virtual Servers screen, you can define and manage your own Servers:

Create a new Server:	1.	Click "Clear Form"
	2.	Enter the required data, as described above.
	3.	Click "Add".
	4.	The new Server will now appear in the list.

Modify (Edit) a Server: 1. Select the desired Server from the list

2.Make any desired changes (for example, change the Enable/Disable setting).

3.Click "Update" to save changes to the selected Server.

Delete a Server: 1. Select the entry from the list.

2.Click "Delete".

Note: You can only delete Servers you have defined. Pre- defined Server cannot be deleted.

From the Internet, ALL Virtual Servers have the IP

Address allocated by your ISP.

52