Teledyne M300EM Setup Variable, Numeric, Default, Value, Units, Range, Description, A-18

APPENDIX A-2: Setup Variables For Serial I/O Teledyne API - T300/T300M and M300E/EM PN 04906H (DCN5840)

Setup Variable	Numeric	Default	Value
	Units	Value	Range
SERIAL_NUMBER	—	“00000000 ”	Any character
		0	in the allowed
			character set.
			Up to 100
			characters
			long.
DISP_INTENSITY	—	HIGH 0	HIGH,
			MED,
			LOW,
			DIM
I2C_RESET_ENABLE	—	ON	OFF, ON
CLOCK_FORMAT	—	“TIME=%H:%	Any character
		M:%S”	in the allowed
			character set.
			Up to 100
			characters
			long.

ALARM_TRIGGER 3,4	Cycles	10	1–100
REF_SDEV_LIMIT	mV	50	0.1–500

Description

Unique serial number for instrument.

Front panel display intensity.

ON enables automatic reset of the I2C bus in the event of communication failures; OFF disables automatic reset.

Time-of-day clock format flags. Enclose value in double quotes

(")when setting from the RS-232 interface.

“%a” = Abbreviated weekday name.

“%b” = Abbreviated month name.

“%d” = Day of month as decimal number (01 – 31).

“%H” = Hour in 24-hour format (00 – 23).

“%I” = Hour in 12-hour format (01

– 12).

“%j” = Day of year as decimal number (001 – 366).

“%m” = Month as decimal number (01 – 12).

“%M” = Minute as decimal number (00 – 59).

“%p” = A.M./P.M. indicator for 12-hour clock.

“%S” = Second as decimal number (00 – 59).

“%w” = Weekday as decimal number (0 – 6; Sunday is 0).

“%y” = Year without century, as decimal number (00 – 99).

“%Y” = Year with century, as decimal number.

“%%” = Percent sign.

Concentration alarm trigger sensitivity adjustment.

Reference detector standard deviation must be below this limit to switch out of startup mode.

A-18 04188D DCN5752