Teledyne M300EM operation manual Machine Id

Teledyne API – Technical Manual - Model 300E Family CO Analyzers Remote Operation

8.1.6.MACHINE ID

Each type of Teledyne API’s analyzer is configured with a default ID code.

∙The default ID code for the M300E/EM Analyzers is 300.

The ID number is only important if more than one analyzer is connected to the same communications channel such as when several analyzers are:

∙On the same Ethernet LAN (see Section 8.4);

∙in a RS-232 multidrop chain (see Section 8.2) or;

∙operating over a RS-485 network (See Section 8.3).

If two analyzers of the same model type are used on one channel, the ID codes of one or both of the instruments needs to be changed.

To edit the instrument’s ID code, press:

The ID can also be used for to identify any one of several analyzers attached to the same network but situated in different physical locations.

04288D DCN5752 155