Teledyne M300EM Numeric, Default, Value, Units, Range, Setup Variable, Description

Teledyne API - T300/T300M and M300E/EM PN 04906H (DCN5840) APPENDIX A-2: Setup Variables For Serial I/O

Setup Variable	Numeric		Default	Value
	Units		Value	Range
FILT_ASIZE	Samples	48,		1–1000
		20	3, 8,
		40	20, 22
FILT_DELTA	PPM	4,		1–1000
		0.7 5
		15	3, 8
		0.15 9, 12
		0.4 19, 23
		0.2 20, 22
FILT_PCT	%	10		1–100
		5 20, 22, 23
FILT_DELAY	Seconds	90,		0–180
		72	20, 22
FILT_ADAPT	—	ON		ON, OFF
CO2_DWELL 10	Seconds	0.1		0.1–30
CO2_FILT_ADAPT 10	—	ON		ON, OFF
CO2_FILT_SIZE 10	Samples	48		1–300
CO2_FILT_ASIZE 10	Samples	12		1–300
CO2_FILT_DELTA 10	%	2		0.01–10
CO2_FILT_PCT 10	%	10		0.1–100
CO2_FILT_DELAY 10	Seconds	90		0–300
CO2_DIL_FACTOR 10	—	1		0.1–1000
O2_DWELL 14	Seconds	1		0.1–30
O2_FILT_ADAPT 14	—	ON		ON, OFF
O2_FILT_SIZE 14	Samples	60		1–500
O2_FILT_ASIZE 14	Samples	10		1–500
O2_FILT_DELTA 14	%	2		0.1–100
O2_FILT_PCT 14	%	2		0.1–100
O2_FILT_DELAY 14	Seconds	20		0–300
O2_DIL_FACTOR 14	—	1		0.1–1000

Description

Moving average filter size in adaptive mode.

Absolute change to trigger adaptive filter.

Percent change to trigger adaptive filter.

Delay before leaving adaptive filter mode.

ON enables adaptive filter; OFF disables it.

Dwell time before taking each sample.

ON enables CO2 adaptive filter; OFF disables it.

CO2 moving average filter size.

CO2 moving average filter size in adaptive mode.

Absolute CO2 conc. change to trigger adaptive filter.

Percent CO2 conc. change to trigger adaptive filter.

Delay before leaving CO2 adaptive filter mode.

Dilution factor for CO2. Used only if is dilution enabled with FACTORY_OPT variable.

Dwell time before taking each sample.

ON enables O2 adaptive filter; OFF disables it.

O2 moving average filter size in normal mode.

O2 moving average filter size in adaptive mode.

Absolute change in O2 concentration to shorten filter.

Relative change in O2 concentration to shorten filter.

Delay before leaving O2 adaptive filter mode.

Dilution factor for O2. Used only if is dilution enabled with FACTORY_OPT variable.

A-9