Teledyne M300EM A-23, Test Function Name, Message Text, Description, Stabil_Samples

Teledyne API - T300/T300M and M300E/EM PN 04906H (DCN5840)APPENDIX A-3: Warnings and Test Functions

Table A-3: T300/T300M and M300E/EM Test Functions, Revision L.8

TEST FUNCTION NAME	MESSAGE TEXT				DESCRIPTION
RANGE	RANGE=50.0 PPM 3				D/A range in single or auto-range modes.
	CO RANGE=50.0 PPM 3, 7
RANGE1	RANGE1=50.0 PPM 3				D/A #1 range in dual range mode.
	CO RANGE1=50.0 PPM 3, 7
RANGE2	RANGE2=50.0 PPM 3				D/A #2 range in dual range mode.
	CO RANGE2=50.0 PPM 3, 7
CO2RANGE	CO2 RANGE=20 % 7				CO2 range.
O2RANGE	O2 RANGE=100 % 10				O2 range.
STABILITY	STABIL=0.0 PPM 3				Concentration stability (standard deviation
	CO STB=0.0 PPM	3, 7, 10			based on setting of STABIL_FREQ and
					STABIL_SAMPLES).
	CO2 STB=0.0 % 7
	O2 STB=0.0 % 10
RESPONSE 2	RSP=0.20(0.00) SEC				Instrument response. Length of each
					signal processing loop. Time in
					parenthesis is standard deviation.
COMEAS	CO MEAS=4125.0 MV				Detector measure reading.
COREF	CO REF=3750.0 MV				Detector reference reading.
MRRATIO	MR RATIO=1.100				Measure/reference ratio.
AUTOZERO 4, 5	AZERO RATIO=1.234				Measure/reference ratio during auto-
					reference.
SAMPPRESS	PRES=29.9 IN-HG-A				Sample pressure.
PURGEPRESS 9	PURGE=7.5 PSIG				Purge pressure
VACUUM 8	VAC=6.8 IN-HG-A				Vacuum pressure.
SAMPFLOW 6	SAMP FL=751 CC/M				Sample flow rate.
SAMPTEMP	SAMPLE TEMP=26.8 C				Sample temperature.
BENCHTEMP	BENCH TEMP=48.1 C				Bench temperature.
WHEELTEMP	WHEEL TEMP=68.1 C				Wheel temperature.
O2CELLTEMP 10	O2 CELL TEMP=50.2 C				O2 sensor cell temperature.
BOXTEMP	BOX TEMP=26.8 C				Internal box temperature.
BOXTEMP2 4	BOX TEMP2=29.6 C				Internal box temperature #2.
OVENTEMP 11	OVEN TEMP=30.1 C				Oven temperature
PHOTOTEMP	PHT DRIVE=2500.0 MV				Photometer temperature.
COSLOPE	SLOPE=1.000				CO slope for current range, computed
	CO SLOPE=1.000	7			during zero/span calibration.
COSLOPE1	SLOPE1=1.000				CO slope for range #1 in dual range
	CO SLOPE1=1.000		7		mode, computed during zero/span
					calibration.
COSLOPE2	SLOPE2=1.000				CO slope for range #2 in dual range
	CO SLOPE2=1.000		7		mode, computed during zero/span
					calibration.
COOFFSET	OFFSET=0.000				CO offset for current range, computed
	CO OFFSET=0.000		7		during zero/span calibration.
COOFFSET1	OFFSET1=0.000				CO offset for range #1 in dual range
	CO OFFSET1=0.000			7	mode, computed during zero/span
					calibration.

A-23