Teledyne M300EM Setup Variable, Numeric Units, Default Value, Value Range, Description

APPENDIX A-2: Setup Variables For Serial I/O Teledyne API - T300/T300M and M300E/EM PN 04906H (DCN5840)

APPENDIX A-2: Setup Variables For Serial I/O

Table A-1: T300/T300M and M300E/EM Setup Variables, Revision L.8

Setup Variable

Numeric

Units

Default

Value

Value

Range

Description

Low Access Level Setup Variables (818 password)

DAS_HOLD_OFF	Minutes	15	0.5–20			Duration of DAS hold off period.
CONC_PRECISION	—	3	AUTO,			Number of digits to display to the
			0,			right of the decimal point for
						concentrations on the display.
			1,
			2,
			3,
			4
REM_CAL_DURATION 17	Minutes	20	1–120			Duration of automatic calibration
						initiated from TAI protocol.
STABIL_GAS	—	CO 0	CO,			Selects gas for stability
			CO2	10	,	measurement.
			O2 14
DYN_ZERO	—	OFF	ON, OFF			ON enables remote dynamic
						zero calibration; OFF disables it.
DYN_SPAN	—	OFF	ON, OFF			ON enables remote dynamic
						span calibration; OFF disables it.
CLOCK_ADJ	Sec./Day	0	-60–60			Time-of-day clock speed
						adjustment.

Medium Access Level Setup Variables (929 password)

LANGUAGE_SELECT	—	ENGL 0	ENGL,
			SECD,
			EXTN
MAINT_TIMEOUT	Hours	2	0.1–100
CONV_TIME	—	33 MS 0	33 MS,
			66 MS,
			133 MS,
			266 MS,
			533 MS,
			1 SEC,
			2 SEC
CO_DWELL	Seconds	0.2	0.1–30
CO_SAMPLE	Samples	1	1–30
PRE_FILT_SIZE 5, 19	Samples	16	1–50
FILT_SIZE	Samples	750,	1–1000
		720 9, 12
		200 3, 8
		1000 19, 23

Selects the language to use for the user interface.

Time until automatically switching out of software- controlled maintenance mode.

Conversion time for measure/reference detector channel.

Dwell time before taking measure or reference sample.

Number of samples to take in measure or reference mode.

Moving average pre-filter size. Moving average filter size.

A-8 04188D DCN5752