Teledyne M300E Using This Manual, Part I – General Information, Table Of Contents, Introduction

Teledyne API – Technical Manual - Model 300E Family CO Analyzers Introduction

1.2.1.USING THIS MANUAL

NOTE

This manual explains the operation and use of both the M300E and the M300EM Gas Filter Correlation

Carbon Monoxide Analyzer.

For the most part these two instruments are nearly identical in their features and functions.

The examples and illustrations shown in this manual represent the M300E. Where a significant difference

does exist between the different models, each version is shown.

NOTE

Throughout this manual, words printed in capital, bold letters, such as SETUP or ENTR represent

messages as they appear on the analyzer’s display.

This manual has the following structure:

TABLE OF CONTENTS:

Outlines the contents of the manual in the order the information are presented. This is a good overview of the topics covered in the manual. There is also a list of appendices, figures and tables.

PART I – GENERAL INFORMATION

INTRODUCTION

A brief description of the M300E/EM Analyzer architecture as well as a description of the layout of the manual and what information is located in its various sections.

SPECIFICATIONS AND WARRANTY

Lists the performance specifications of the analyzers . If applicable, a description of the conditions and configuration under which EPA equivalency was approved as well as the Teledyne API’s warranty statement.

GETTING STARTED

This section provides instructions for setting up, installing and running your analyzer for the first time.

GLOSSARY

Answers to the most frequently asked questions about operating the analyzer and a glossary of acronyms and technical terms.

OPTIONAL HARDWARE & SOFTWARE

The section describes the optional equipment and their functions for your analyzer.

04288D DCN5752 25