TRENDnet BRF114 Checking TCP/IP Settings - Windows 9x/ME, Using DHCP, Using Specify an IP Address

TW100-BRF114 User’s Guide

Checking TCP/IP Settings - Windows 9x/ME:

3.Select Control Panel - Network. You should see a screen like the following:

Figure 9: Network Configuration

4.Select the TCP/IP protocol for your network card.

5.Click on the Properties button. You should then see a screen like the following.

Figure 10: IP Address (Win 95)

Ensure your TCP/IP settings are correct, as follows:

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the TW100-BRF114 will act as a DHCP Server.

Restart your PC to ensure it obtains an IP Address from the TW100-BRF114.

Using "Specify an IP Address"

If your PC is already configured, check with your network administrator before making the following changes:

18