Fujitsu DL3800 manual Selecting a Good, Location

SETTING UP	2
Your new printer is easy to install and set up.
This chapter tells you how to set up the printer
and start printing right away. If this is your first

printer, you should read the entire chapter before attempting to use the printer.

In this chapter, you will learn how to:

•Unpack, assemble, and select a good location for the printer

•Identify the printer’s major parts

•Connect the power and interface cables

•Test the printer before connecting it to your computer

•Select an emulation and print a sample page using your software

If you have a problem while setting up the printer, review the section Solving Problems in Chapter 7. If the problem persists, contact your dealer.

SELECTING A GOOD	This printer is suitable for most business, office, and home environ-
LOCATION	ments. To obtain peak performance from the printer, select a location
	that meets the following guidelines:
	√ Place the printer on a sturdy, level surface.
	√ Place the printer near a well-grounded AC power outlet.
	√ Ensure easy access to the front and rear of the printer by leaving
	several inches of space around the printer. Do not block the air
	vents on the front, left, and right sides of the printer.
	√ Do not place the printer in direct sunlight or near heaters.
	√ Make sure that the room is well-ventilated and free from
	excessive dust.

Setting Up

User's Manual 2-1