Fujitsu DL3800 manual Installing the Ribbon Cartridge, Preparing to install the ribbon

SETTING UP

3.Hold the cut sheet stand at an angle over the top of the printer. Slide the mounting pins into the long, front grooves of the notches. This is the cut sheet stand's up position, used for printing single sheets.

To rotate the cut sheet stand to its down position, grasp it at the sides and lift it up until the two upper mounting pins fall into the rear grooves of the notches. This position is used for printing most continuous forms.

Installing the Ribbon Cartridge

The basic printer uses a black ribbon cartridge. If you have a color kit option, you can use either color or black ribbon cartridges. To install the ribbon cartridge:

1.Open the front cover of the printer. For easy installation, slide the print head carriage so that it does not face a bail roller.

2.The paper thickness lever, located on the right of the printer, has nine positions. Before you install the ribbon cartridge, move this lever to D.

Paper thickness lever

Move to D.

Setting Up

Preparing to install the ribbon

User's Manual 2-7