Fujitsu DL3800 manual Print buffer Download buffer

USING SETUP MODE

Table 5.4 HARDWRE Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

HARDWRE	Options	Description
Items
<PRT-DIR>	BI-DIR	Bidirectional printing. The printer
		prints in either direction while
		seeking the next print direction for a
		shorter print time.
	UNI-DIR	Unidirectional printing.
		Unidirectional printing is used for
		printing vertical lines in tables even if
		vertical alignment is not adjusted.
		Unidirectional printing is slower than
		bidirectional printing.
<BUZZER>		Enables or disables the printer status
		buzzer.
	ON	Buzzer on (recommended).
		The printer beeps to indicate paper-
		out or other conditions.
	OFF	Buzzer off under any conditions.
<WORD-LG>		To determine the required word
		length, refer to your computer
		documentation. Select 8-BIT to print
		bit image graphics.
	8 BIT	8-bit word length (used by most
		computers)
	7 BIT	7-bit word length (MSB = 0)
<BUFFER>		Assigns buffer memory to input data
		and downloaded font data.
		Print buffer	Download buffer
	NONE	0 byte	128K bytes
	256BYTE	256 bytes	127.75K bytes
	2KBYTE	2K bytes	126K bytes
	8KBYTE	8K bytes	120K bytes
	24KBYTE	24K bytes	104K bytes
	32KBYTE	32K bytes	96K bytes
	96KBYTE	96K bytes	32K bytes
	128KBYT	128K bytes	0K bytes

5-30 User's Manual