Fujitsu DL3800 manual Vertical Control, Esc Lf

COMMAND SETS

Function	Command
Set character offset to n/120 inch	ESC DC1 (n)
Cancelled by CR or ESC x.
(0 ≤ n ≤ 63) (64 ≤ n ≤ 127)
Set character pitch to n/360 inch	ESC e H
(0 ≤ n1 n2 n3 ≤ 999)	(n1) (n2) (n3)
n1, n2, and n3 are the hundreds, tens, and
units digits.
Vertical Control
Line feed	LF
Reverse line feed	ESC LF
Form feed	FF
Advance paper n/180 inch (0 ≤ n ≤ 255)	ESC J (n)
Reverse paper n/180 inch (0 ≤ n ≤ 255)	ESC j (n)
Advance paper n/360 inch	ESC e J
(0 ≤ n1 n2 n3 ≤ 999)	(n1) (n2) (n3)
n1, n2, and n3 are the hundreds, tens, and
units digits.
Reverse paper n/360 inch	ESC e j
(0 ≤ n1 n2 n3 ≤ 999)	(n1) (n2) (n3)
n1, n2, and n3 are the hundreds, tens, and
units digits.
Set line spacing to 1/8 inch (8 lpi)	ESC 0
Set line spacing to n/180 inch	ESC 3 (n)
(0 ≤ n ≤ 255)
Set line spacing to 7/60 inch	ESC 1
Set line spacing to n/60 inch	ESC A (n)
(0 ≤ n ≤ 127)
Set line spacing to 1/6 inch (6 lpi) or to the	ESC 2
value set with the ESC A command.
The preset line spacing command is
ESC A (n).
Set line spacing to n/360 inch	ESC e V
(0 ≤ n1 n2 n3 ≤ 999)	(n1) (n2) (n3)
n1, n2, and n3 are the hundreds, tens, and
units digits.
Set line spacing to n/360 inch	FS 3 (n)
(1 ≤ n ≤ 255)

Command Sets

User's Manual C-5