Fujitsu DL3800 manual Cont-Pe, Tractor, Edge

USING SETUP MODE

Table 5.6 CONFIG Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

CONFIG Items	Options	Description
<CONT-PE>		Detection of end of continuous
		forms.
	TRACTOR	Paper end is detected by the sensor
		on the tractor unit.
		Paper-end unprinted area:
		Continuous forms: About 80 mm
		Botom feeding: About 35 mm
	EDGE	Regardless of paper end, printing
		continues near to the edge of paper.
		Paper-end unprinted area:
		About 4.7 mm for both continu-
		ous forms and bottom feeding
<==END==>		Indicates the end of the CONFIG
		item list. Press the FONT button to
		print the first item, which is
		<TEAROFF>.
		Press the MENU button to print the
		previous item. Press the ONLINE
		button to reprint the <<FUNC-
		TION>> menu.

Procedure

To change the printer configuration options, make sure that continu- ous forms paper is loaded and then proceed as follows:

1.Enter setup mode.

Press the FONT button and the MENU button simultaneously until the printer beeps. Wait for the printer to stop printing and check that the following <<FUNCTION>> menu is printed:

<<FUNCTION>>

SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP

V-ALMNT

5-42 User's Manual