Fujitsu DL3800 manual Chr-Set, Italic, Graphic, Off, Prf-Skp, No-Skip

USING SETUP MODE

Table 5.3 MENU1 and MENU2 Items and Options (Cont.)

NOTES:

•Underlined options are the factory defaults.

•Asterisks identify items and options that differ for the IBM XL24E and Epson ESC/P2 emulations. The notes are defined at the end of the table.

MENU1 and	Options	Description
MENU2 Items
<CHR-SET>	SET 1	IBM character set 1
	SET 2	IBM character set 2
		If a downloaded (soft) font is used,
		the character set for that font
		overrides the <CHR-SET> setting.
	(*4)
	ITALIC	Italic characters are available.
	GRAPHIC	Graphics characters (ruled lines) are
		available.
<AGM> (*2)	OFF	Specifies that Alternate Graphics
		Mode (AGM) is off. The base of line
		spacing is 1/72 inch or 1/216 inch.
	ON	Specifies that Alternate Graphics
		Mode (AGM) is on. The base of line
		spacing is 1/60 inch or 1/180 inch.
<PRF-SKP>		For continuous forms, this option
		specifies whether an inch is skipped
		around the perforation. If you are
		not using software to specify a
		bottom margin, select SKIP when
		using thicker, multipart forms.
	SKIP	One inch is skipped around the
		perforation.
	NO-SKIP	The perforation is not skipped.
		Printing continues in the bottom
		margin of the page.

5-24 User's Manual