Fujitsu DL3800 manual Deciding Which Options, To Change, Required Options

USING SETUP MODE

DECIDING WHICH OPTIONS	The previous page shows a printout of the printer’s factory default
TO CHANGE	settings. In this printout, options are listed by functional group:
		•	Menu 1 settings (MENU1 function)
		•	Menu 2 settings (MENU2 function)
		•	Hardware settings (HARDWRE function)
		•	Print position adjustment settings (ADJUST function)
		•	Configuration settings (CONFIG function)
	Most selectable options only alter print features, such as the
	typestyle, page format, and color selection. However, some options
	must be selected correctly for the printer to work properly with
	your hardware and software. For each function, Table 5.2 lists items
	whose options must be selected correctly for system and printer
	accessory compatibility.
				Table 5.2 Required Options
		Function		Item	Option
		MENU1		EMULATE	The emulation selected on the printer
					must be the same as the emulation
					selected in your software. If you selected
					an emulation when you set up the
					printer (Chapter 2), you do not need to
					change the EMULATE option unless you
					want to change to a different emulation.
					The emulation assigned to MENU1 is the
					default when you turn the printer on.
					See the section Changing MENU1 and
					MENU2 Options later in this chapter.
		MENU2		None	If you use MENU2, the emulation selected
					for MENU 2 must be the same as the
					emulation selected in your software.
					See the section Changing MENU1 and
					MENU2 Options later in this chapter.

5-12 User's Manual