Fujitsu DL3800 manual Areacnt, On-Load, Offline, Online, Lock, Setup, All

USING SETUP MODE

Table 5.6 CONFIG Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

CONFIG Items	Options	Description
<AREACNT>		Area-over detection control.
	ENABLE	Detects the left and right edges of
		paper when loading the paper.
		The printer does not print data
		beyond the edges, but turns on the
		AREA OVER indicator.
	DISABLE	Does not detect the edges. Select
		this option when you are using
		colored or preprinted paper.
<ON-LOAD>		Printer status after loading paper in
		offline mode.
	OFFLINE	Remains offline after paper loading.
	ONLINE	Goes into online after paper loading.
<LOCK>		Lock function of setup mode.
	NONE	Enables all buttons on the control
		panel.
	SETUP	Disables the setup-related buttons
		to keep the printer from entering
		setup mode during the offline state.
	ALL	Disables the setup-rlated buttons
		and the LOCK, FONT, and MENU
		buttons.
<//S//>		Effectiveness of the Cut Sheet
		Selection command (//S//).
	DISABLE	Makes the command ineffective.
	ENABLE	Makes the command effective.
		Note: The Cut Sheet Selection
		command (//S//) changes the paper
		source to the paper table and waits
		for manual insertion of a cut sheet.

Setup Mode

User's Manual 5-41