Jasco RM24908 warranty Programming With Code Search, Identifying Codes From Your Universal Remote

Programming With Code Search

If your TV, VCR, DBS Satellite System or Cable Box does not respondafteryouhavetriedallthecodesforyourbrand,orifyour brand is not listed, try searching your code by following the steps below:

1. Manually turn on the device you wish to program.

2.Press and hold the CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.

3.Press and release the

device button for the device you are programming. The INDICATOR LIGHT will blink once, then remain lit.

4.Press and release OFF•ON until your device turns off.

5.When your device turns off, press ENTER, the INDICATOR LIGHT will turn off.

IMPORTANT: you may have to press OFF•ON up to 200 times.

Identifying Codes

From Your Universal

Remote

INDICATOR

LIGHT

BLINK

OFF

Retrieving Codes

If you need to find the three-digit code for your TV, VCR, DBS or Cable Box after your device is set-up, use this procedure.

1.Press and hold CODE SEARCH until the INDICATOR LIGHT

lights, then release CODE SEARCH.

2.Press and release the device but- ton for the code you are retrieving. The INDICATOR LIGHT will blink once.

INDICATOR LIGHT

3. Press and release

CODE SEARCH. The INDICATOR LIGHT will turn off.

4.Starting with 0 on the keypad, press the number buttons in order (0-9) until the INDICATOR LIGHT blinks.

5.The number which causes the INDICATOR LIGHT to blink is the first digit of your code.

6.Repeat Step 4 until you have retrieved all three numbers in the code.

...

OFF

10