Trouble Shooting
PROBLEM
Red light not blinking when you press any key.
The remote does not operate your devices.
Not performing commands properly
SOLUTION
A)Replace the batteries with 2 new AAA alkaline batteries.
B)Checkifbatteriesareproperly installed.
A)Try all the codes listed for your brand.
B)Try the Code Search method.
Start Code Search over again to locate the proper code for full compatibility
TrytheVCRcodeforyourbrand. Some combo units, however, may require both a TV and VCR code for full operation.
Problems programming a TV/ VCR Combo Unit
VCR not responding
Problems changing channels
As a safety feature on your remote, you must press the REC button twice.
If your original remote required ENTER after a channel, press ENTER after you select a chan- nel.
A)Make sure you have new bat- teries and you are aiming your remote at your device.
B)Check that batteries are prop- erly installed.
Remote must remain aimed at television after sleep is set in order for it to work.
No response after pressing a key
Due to some designs, the origi- nal remote will only perform these functions.
Note: Reprogramming may be required after batteries are removed.
11