TV off.
Menu Function
The Menu Function is used to make changes in the selected settings such as setting color, channels, timer, etc. The MENU button invokes TV, and SAT
modes. Each menu will vary from brand to brand.
Entering the Menu Mode:
1.Push the device button on the remote for the desired menu screen.
BLINK
2.Push the MENU button. This allows you to view the menu of the device chosen. The menu should now be visible on your television.
3.While in Menu Mode, these buttons will function as follows:
BLINK
VOL UP/DOWN buttons will operate as CURSOR RIGHT/LEFT.
CHAN UP/DOWN buttons will operate as CURSOR UP/DOWN.
Not all functions in competitive models and brands of televisions may be fully supported.
BLINK
For RCA, GE, ProScan TVs pushing the MENU button will select the highlighted item. The numeric buttons may also be used to select the MENU choice.
EXITING THE MENU MODE
To exit the Menu Mode and clear the screen, push the device but- ton you have chosen on the remote.
NOTE:TheremotewillautomaticallyexittheMenuModeafterten (10) seconds of inactivity with no buttons being pushed.
Special notes:
1.Because of the wide variety of menu formats, some experiment- ing may be required.
2.SONY: Pressing the ENTER button while in menu mode returns to previous menu.
3.ZENITH: Push the menu button a second time to move from the
9