Jasco RM24906 instruction manual Using Your Remote, Sleep Function

Page 10

Using Your Remote, cont.

Sleep Function

The Sleep button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below. The remote must be in TV mode to set a Sleep Timer. This feature works even if your TV does not have a sleep feature.

1. Press and release the TV device but-

ton.

2. Press and hold the Sleep button until the

LED remains lit (about 2-3 sec-

onds).

3.Release the Sleep button.

4.Press and release the numeric buttons (01-99) for the time required. The LED will

blink off to indicate button press acceptance.

5.TV Sleep Timer is set.

6.Leave the Remote pointing towards the TV with an unobstructed path.

To cancel the Sleep Timer, press and hold the Sleep button until the LED blinks, or press and release the Power button in TV mode.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents RM24906 Table of Contents Battery Saver SetupBattery Installation Code SetupButton Functions RECORD, Play TV, VCR, DVD/AUX STOP, REW, FFButton Functions, Onoff Turns product On or OffMenu Operation Direct Code Entry Code Search Using Your Remote Code IdentificationUsing Your Remote, Sleep FunctionControlling Combo Devices Controlling Devices with Separate Power On and Off ButtonsVCR/DVD Punch-Through Volume/Mute Control and Punch- Through Setting ALL Volume/Mute Control to any one ModeSetting any Mode to use its own Volume/Mute Control Troubleshooting Remote does not operate your productDay Limited Warranty Universal Remote
Top Page Image Contents