Jasco RM24906 instruction manual Troubleshooting, Remote does not operate your product

Page 14

Troubleshooting

Remote does not operate your product.

Press the device button of the product you want to control.

Program the remote with a new code.

Install new batteries. (You might have to reprogram your remote after installing new batteries.)

Remote may not be compatible with your product.

Remote does not operate some features of your product.

Sometimes a particular code might operate some features but not all. Try programing remote with a new code.

Remote may not be able to operate all features of your product or button names might be different than your product.

Red Indicator blinks after you program a product code.

Remote did not accept the code.

Try to program the code again or try a different code.

Lost Your Codes?

Enclosed with this remote is a sticker on which you should write the codes for each device you programmed. Apply the sticker to the back of the remote or somewhere convenient for future reference.

Also on the sticker is our website address which, should you lose your codes or programming instructions, you can find available on our website: www.jascoproducts.com

14

Image 14
Contents RM24906 Table of Contents Battery Saver SetupBattery Installation Code SetupButton Functions RECORD, Play TV, VCR, DVD/AUX STOP, REW, FFButton Functions, Onoff Turns product On or OffMenu Operation Direct Code Entry Code Search Using Your Remote Code IdentificationUsing Your Remote, Sleep FunctionVCR/DVD Punch-Through Controlling Devices with Separate Power On and Off ButtonsControlling Combo Devices Volume/Mute Control and Punch- Through Setting ALL Volume/Mute Control to any one ModeSetting any Mode to use its own Volume/Mute Control Troubleshooting Remote does not operate your productDay Limited Warranty Universal Remote