Jasco RM24906 instruction manual Direct Code Entry

Page 7

Direct Code Entry

1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button.

2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit.

3.Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.

4.With your device on, press ON•OFF. If the device turns off, no further

programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.

Write your codes down here for easy reference later.

Device

Device stored

Code

 

 

 

TV

TV

 

VCR

 

 

CBL/SAT

 

 

DVD/AUX

 

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents RM24906 Table of Contents Code Setup SetupBattery Installation Battery SaverRECORD, Play TV, VCR, DVD/AUX STOP, REW, FF Button FunctionsOnoff Turns product On or Off Button Functions,Menu Operation Direct Code Entry Code Search Code Identification Using Your RemoteSleep Function Using Your Remote,Controlling Combo Devices Controlling Devices with Separate Power On and Off ButtonsVCR/DVD Punch-Through Setting ALL Volume/Mute Control to any one Mode Volume/Mute Control and Punch- ThroughSetting any Mode to use its own Volume/Mute Control Remote does not operate your product TroubleshootingDay Limited Warranty Universal Remote
Top Page Image Contents