RCA F27TF12 manual Buttons on the Remote Control

VCR1 ON•OFF TV

The Buttons on the Remote Control

Your backlit remote has a light button that glows in the dark. Press this button to light the channel up and channel down (CH +/–)and volume up and down (VOL </>)buttons. If you don’t press any buttons for several seconds, the light turns off to conserve battery power.

1 2 3

4 5 6

7 8 9

To enter a 2-digit channel, press the two digits. To enter a 3-digit channel, press and hold the first digit until two dashes appear on the screen (to the right of the first number), then add the next two digits. Example: to tune to channel 123, press and hold 1 until 1– – appears, press 2, then press 3.

ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button in SAT•CABLE mode.

Arrow buttons (up, down, right, and left) Press the arrow buttons to move through the on-screen menus.

AUX button Puts the remote in AUX mode.

CH (+ and –) buttons Scan up or down through stored channels. Press once to change the channel up or down; press and hold to continue changing channels. The remote must be in TV mode.

CH CTRL (Channel Control) Selects the picture window (main window or PIP window) that changes when you press the channel up or channel down button or the INPUT button.

CLEAR button Resets the time counter.

DVD button Puts the remote in DVD mode. Operates RCA, GE, and Proscan DVD Players.

FORWARD (fast forward) button Fast forwards a tape or disc, if you’ve programmed the remote to operate a VCR or DVD Player and you put the remote in the VCR or DVD mode.

GUIDE If this remote control operates a satellite receiver (most RCA, GE, and Proscan models), press GUIDE to see listings from your satellite service provider.

GO BACK button Returns you to the previous channel.

INFO button Displays TV/VCR’s current status. Displays time counter when a tape is inserted. Press again to remove display.