RCA F25305, F20645 manual Plug in the TV, Place Batteries Remote, Turn on the TV, Program the TV

SETUP AND CONNECTIONS

STEP 4: PLUG IN THE TV

Plug the end into the wall outlet, matching the wide blade of the plug with the wide slot in the outlet. Be sure to insert the plug completely.

STEP 5: PLACE BATTERIES IN THE

REMOTE

•Remove the battery compartment cover from the back of the remote.

•Insert fresh batteries. Make sure that the polarities (+ and -) are aligned correctly.

•Replace the cover.

STEP 6: TURN ON THE TV

Press TV on the remote, or press POWER on the TV itself.

Pressing the TV button not only turns on the TV, but puts the remote into TV mode, so that the buttons on the remote will control TV functions.

ON-SCREEN PROGRAM GUIDE

The TV is designed to bring up the GUIDE Plus+ Gold on-screen program guide when you use the TV button on the remote to turn on the TV (after you have set up the GUIDE Plus+ Gold System). For more information on setting up the GUIDE Plus+ Gold System, see the next section, Interactive Setup.

To get out of the GUIDE Plus+ Gold System:

•Press OK to exit the GUIDE Plus+ Gold System and tune to the highlighted channel.

•Press GUIDE to exit the GUIDE Plus+ Gold System and tune to the channel displayed in the View window.

•Press CLEAR to exit the GUIDE Plus+ Gold System and go to the last channel you were watching.

STEP 7: PROGRAM THE TV

Proceed to the next section, Interactive Setup. The interactive setup routine walks you through the steps needed to fully configure the TV.

VCR1	ON OFF	TV
		TV
DVD	VCR2 AUX	SAT CABLE
MUTE	CH +	SKIP
L		V
O		O
V
		L
SOUND	CH -	GO BACK
GUIDE		INFO

10