INTERACTIVE SETUP
USING POINT AND SELECT
You only need to know one rule when using the remote to access on- screen menus and control panels: point and select. The point and select method has two steps.
1.Point to a menu item using the MOVE arrows on the remote.
To point up or down, press the up or down arrows. To point left or right, press the left or right arrows.
2.Select a menu item by pressing MENU or OK.
Selecting an item tells the TV’s menu system to go ahead and make the change or go to a place you have indicated.
ENTERING SETUP
The first screen of the Interactive Setup appears automatically when you turn on your TV for the first time or after a power outage.
1.Press MENU to begin setup or CLEAR to exit.
SETUP
When first used or after a power outage, your television needs to be set up.
Would you like to begin now?
Press MENU to begin setup or
Press CLEAR to exit.
OK
MENUCLEAR
Point and Select
buttons
You can also access the Interactive Setup through the Main menu:
1.Press MENU to bring up the Main menu.
TV MAIN MENU
1 Audio
2 Picture Quality
3Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0Exit
2.Point to Setup and press MENU or OK. The first Setup screen comes up, asking you to confirm that you want to begin.
You can also select a menu item by entering the item number with the number buttons on the remote.
Press CLEAR at any time to remove all displays from the screen and return to TV viewing.
Many VCR user manuals refer to a PROGRAM button. The MENU button on this remote works as a PROGRAM button in VCR mode. Other manuals may refer to a SELECT button. The OK button on this remote works as a SELECT button.
12