Sony GDM-F500T9 service manual Self-diagnosis function, If the 1 power indicator is green

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard.

1 (power) indicator

If the 1 (power) indicator is green

1Remove any plugs from the video input 1 and 2 connectors, or turn off the connected computer(s).

2Press the 1 (power) button to turn the monitor off and on.

3Move the joystick to the right for 2 seconds before the monitor enters power saving mode.

1	If all four color bars appear (white, red, green, blue), the monitor
	is working properly. Reconnect the video input cables and check
-8	the condition of your computer(s).

If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor’s condition.

If the 1 (power) indicator is flashing orange

Press the 1 (power) button to turn the monitor off and on.

If the 1(power) indicator lights up green, the monitor is working properly.

If the 1 (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the 1 (power) indicator and inform your authorized Sony dealer of the monitor’s condition. Be sure to note the model name and serial number of your monitor. Also note the make and model of your computer and video board.

Specifications

GDM-F400

CRT	0.22 mm aperture grille pitch
	19 inches measured diagonally
	90-degree deflection
	FD Trinitron
Viewable image size	Approx. 364.8 × 273.6 mm (w/h)
	(14 3/8 × 10 7/8 inches)
	18.0" viewing image
Resolution	Horizontal: Max. 1600 dots
	Vertical: Max. 1200 lines
Standard image area	Approx. 352 × 264 mm (w/h)
	(13 7/8 × 10 1/2 inches)
	or
	Approx. 330 × 264 mm (w/h)
	(13 × 10 1/2 inches)
Deflection frequency*	Horizontal: 30 to 107 kHz
	Vertical: 48 to 160 Hz
AC input voltage/current	100 to 240 V, 50 – 60 Hz, 1.8 – 1.0 A
Power consumption	Max. 140 W (with no USB devices
	connected)
Dimensions	Approx. 444 × 476 × 455 mm (w/h/d)
	(17 1/2 × 18 3/4 × 18 inches)
Mass	Approx. 28 kg (61 lb 12 oz)
Plug and Play	DDC1/DDC2B/DDC2Bi/DDC2B+
Supplied accessories	See page 6

GDM-F500

CRT	0.22 mm aperture grille pitch
	21 inches measured diagonally
	90-degree deflection
	FD Trinitron
Viewable image size	Approx. 403.8 × 302.2 mm (w/h)
	(16 × 12 inches)
	19.8" viewing image
Resolution	Horizontal: Max. 1800 dots
	Vertical: Max. 1440 lines
Standard image area	Approx. 388 × 291 mm (w/h)
	(15 3/8 × 11 1/2 inches)
	or
	Approx. 364 × 291 mm (w/h)
	(14 3/8 × 11 1/2 inches)
Deflection frequency*	Horizontal: 30 to 121 kHz
	Vertical: 48 to 160 Hz
AC input voltage/current	100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power consumption	Max. 160 W (with no USB devices
	connected)
Dimensions	Approx. 502 × 511 × 486.3 mm (w/h/d)
	(19 7/8 × 20 1/8 × 19 1/4 inches)
Mass	Approx. 34 kg (74 lb 15 oz)
Plug and Play	DDC1/DDC2B/DDC2AB/DDC2B+
Supplied accessories	See page 6

*Recommended horizontal and vertical timing condition

•Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 ∝s, whichever is larger.

•Horizontal blanking width should be more than 2.5 ∝sec.

•Vertical blanking width should be more than 450 ∝sec.

Design and specifications are subject to change without notice.

18