
Operating Instructions
TV and Satellite Receiver
From | Rear of TV |
cable/ | |
antenna |
|
2
1 | Satellite Receiver |
| |
Satellite |
|
antenna | Video (yellow) |
cable | |
| Audio L (white) |
| Audio R (red) |
3
1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV.
3 Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your satellite receiver to AUDIO and VIDEO IN on your TV.
You can use the ![]()
![]()
![]()
![]()
button to switch between the VHF/UHF and VIDEO inputs.
For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO does not provide sound; the audio cables must still be connected.
8