Operating Instructions
Using the Timer 
Menu
To access the Timer menu, refer to the following steps:
To Display | To Highlight |
MENU |
|
To Select
Timer |
|
|
Timer 1 : Set |
| |
Timer 2 : Set |
| |
Current | Time |
|
Move | Select | End |
Current Time Set your TV to the current day and time.
Press g to open Current Time menu:
1Use the F or f button to enter the day and time, then press 
.
2Press 
to exit the menu.
You must set the Current Time before you can use Timer 1 and Timer 2.
Timer 1 and | Use your timers settings to program your TV by day, time, duration and | |||
Timer 2 | channel. The timer’s duration is maximum of 6 hours. When the channel | |||
Scheduled | is fixed, it is not necessary to set the channel. |
| ||
viewing | With the menu open, set cursor on Timer 1 or Timer 2: |
| ||
| 1 | Press F or f to select Timer 1 or Timer 2, then press | . | |
| 2 | Press F or f to enter the desired day, time, duration and channel, then | ||
| 3 | press | . The Timer status should be On when the Timer has been set. | |
| Press | to exit the menu. |
| |
You can set the Timer to On, Off, or Set. Once the timer is set, you can turn it On or Off without having to go through the settings. When you set Timer 1 or Timer 2, a red light on
the front panel of your TV will turn on.
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time and Timer 1 and Timer 2 settings will be cleared.
28