Operating Instructions
Using the Channel Setup Menu
To access the Channel Setup menu, refer to the following steps:
To Display | To Highlight |
| To Select |
| |||
MENU |
|
|
|
Channel Setup |
| |
Favorite Channels |
| |
Cable : On |
|
|
Channel Fix : Off |
| |
Auto Program |
| |
Channel Skip/Add |
| |
Channel Label |
| |
Move | Select | End |
Favorite
Channels Quick access to favorite channels
Press g to open the Favorite Channels menu:
1Use the F or f buttons to select the position
a favorite channel, then press .
2Using the F or f button, select the desired channel.
3Press to change to the channel selected.
4Press G to return to the Channel Setup menu or press to exit.
| To use Favorite Channels: Exit all menus and press | . Press F or f to move the cursor to | ||
| the desired channel number and press | . |
| |
Cable | On: Select if you are receiving cable channels with a CATV cable. | |||
|
| Off: Select if you are using a TV antenna. | ||
| After changing your cable settings, you will need to perform Auto Program. When | |||
| Channel Fix is set, you will not be able to use your Cable settings. | |||
Channel Fix | ||||
| box or VCR. Select the appropriate channel (usually 3 or 4) and use the | |||
| cable box’s or VCR’s remote control for channel selection. | |||
| Video 1: Select from available video inputs when you have connected | |||
|
| video equipment (e.g. satellite receiver) and you want your TV fixed to it. | ||
|
| Off: Channel Fix is not set. |
|
|
Auto Program | Press g to perform Auto Program. |
| ||
| The TV will scan through all available channels and program receivable | |||
| channels. |
|
|
20