Sony KV 36HS500 manual Memory Stick LED, Infrared Receiver IR

Item		Description
1	MEMORY STICK	Memory Stick insertion slot. For details, see “Using the Memory Stick Picture
		Viewer” on page 51.
2	MEMORY STICK LED	When lit, indicates that the Memory Stick is being read. (Do not remove the
		Memory Stick when the indicator is lit.)
3	S VIDEO	Connects to the S VIDEO OUT jack on your camcorder or other video
	VIDEO 2 INPUT	equipment that has S VIDEO. Provides better picture quality than composite
		video (4).

4VIDEO/L(MONO)-AUDIO-RConnects to the composite A/V output jacks on your camcorder or other

	VIDEO 2 INPUT	video equipment.
5	MENU	Press to display the Menu. Press again to exit from the Menu. For details, see
		“Using the Menus” on page 61.
6	V v B b	Press V v B b to move the on-screen cursor.
7	SELECT	Press to select the on-screen highlighted item.
8	TV/VIDEO	Press repeatedly to cycle through the video equipment connected to the TV’s
		video inputs.
9	-VOLUME +	Press to adjust the volume.
0	-CHANNEL+	Press to scan through channels. To scan quickly through channels, press and
		hold down either CHANNEL button.
qa	TIMER LED	When lit, indicates one of the timers is set. When the timer is set, this LED
		will remain lit even if the TV is turned off. For details, see page 71.
qs	STAND BY LED	Blinks when the TV is turned on, then shuts off when the picture is displayed.
		If the LED blinks continuously, this may indicate the TV needs service (see
		“Contacting Sony” on page 78).
qd	Infrared Receiver (IR)	Receives IR signals from the TV’s remote control.
qf	POWER	Press to turn on and off the TV.

Setup

SETUP

SETUP

SETUP

SETUP

11