Remote Control
Problem | Possible Remedies |
Remote control | ❏ The batteries could be weak. Replace the batteries. |
does not operate | ❏ Check the orientation of the batteries. |
| ❏ Press the TV FUNCTION button. You may have inadvertently pressed the |
| SAT/CABLE FUNCTION button, which changes the remote control to SAT or |
| CABLE mode. |
| ❏ Make sure the TV’s power cord is connected securely to the wall outlet. |
| ❏ Locate the TV at least |
|
|
Cannot change channels | ❏ If you are using the TV to change channels, first press the TV FUNCTION |
with the remote control | button. |
| ❏ If you are using another device to change channels, be sure you have not |
| inadvertently switched your TV from the channel 3 or 4 setting. Use the |
| Channel Fix option to “fix” the channel based on the hookup you used (see |
| page 66). |
| ❏ If you are using another device to change channels, be sure to press the |
| FUNCTION button for that device. For example, if you are using your cable box |
| to change channels, be sure to press the SAT/CABLE FUNCTION button. |
|
|
Remote control | ❏ If you replaced the batteries to the remote recently, the code numbers for |
does not operate | the video equipment may need to be reset. |
video equipment | ❏ There may be more than one code for the equipment that you are |
| attempting to operate. |
| ❏ There is a possibility that some |
| your Sony TV remote.You may need to use the equipment’s original |
| remote control. |
|
|
Memory Stick
Problem | Possible Remedies |
Image does not display | ❏ Make sure the image is supported by the TV (see pages |
| ❏ Make sure the Memory Stick is inserted properly (see page 53). |
| ❏ Memory Stick functions are not available while using Twin View, Freeze or |
| Favorite Channel functions. |
|
|
Blank square appears | ❏ This indicates that the image does not support a thumbnail view. Selecting |
instead of a thumbnail image | the icon, however, displays the |
| indicate that both the thumbnail and |
| supported. |
|
|
Cannot rotate image, no | ❏ Be sure the LOCK switch on the Memory Stick is set to off. |
thumbnail appears | ❏ If a blank square appears instead of the thumbnail image, this indicates |
| that the image does not support a thumbnail view and cannot be rotated. |
Cannot hear audio while | ❏ There is no audio available while using Memory Stick. |
using Memory Stick |
|
|
|
Image file name does not | ❏ Dashes appear instead of the file name if the image was recorded using |
appear; instead, dashes | equipment that is not |
appear |
|
SETUP
SETUP
SETUP
Other Info
79