Sony KV-32FS120 manual Using the Remote Control, Remote Control Description

Using the Remote Control

Remote Control Description

Button	Description
1 MUTING	Press to turn off the sound. Press again or press
	to restore sound.

	2 SYSTEM OFF	Press to turn off the equipment programmed into
A	K	the remote control. See “Programming the Remote
		Control” on page 5. This button does not work with
B	L	DVD/VCR combo units, and may not work with
		older Sony equipment.

C	M3 TV/VCR/DVD	Press to change the VHF/UHF output of the VCR
		(or DVD/VCR combination unit). If you have a
	N	non-Sony VCR or DVD, you will need to program
		the remote control to recognize your VCR or DVD.
D	O
		For details, see “Programming the Remote Control”
E
		on page 5.
	P4 PICTURE MODE
		Press repeatedly to step through the available video
	Q	picture modes: Vivid, Standard, Movie, and Pro.
		Also available in the Video menu. See “Using the
		Video Menu” on page 28 for details.
F	5 SLEEP	Press repeatedly until the TV displays the time in
G	R	minutes (15, 30, 45, 60, or 90) that you want the TV
		to remain on before shutting off automatically.
	S	Cancel by pressing until Sleep Off appears.
	6 JUMP	Press to jump back and forth between two channels.
H	T	The TV alternates between the current channel and
		the last channel that you selected. JUMP will not
		work if any FUNCTION Mode (VCR/DVD, SAT/
I	U7 TV/SAT	CABLE, TV) is activated.
		Press to switch between the TV and SAT (satellite)
		inputs when in SAT FUNCTION mode.
J		Press for a direct selection of Effect settings
		(Simulated, SRS, Off) when the remote is in TV
		FUNCTION mode. See “Using the Audio Menu” on
		page 29 for details.
	8 RESET	Press to return to factory settings while in an
		on-screen menu.
	9 VOL (volume)	Press (+) or (-) to adjust the volume.
	q; CODE SET	Press to program your remote control to operate
		connected video equipment. See “Programming the
		Remote Control” on page 5.

Remote Control

3