the VHF/UHF jack on the TV
b)
the IN jack on your cable box
a)
Cable box
5
1 Connect the single input jack of the splitter (not supplied) to your incoming cable connection.
2 Using coaxial cables (not supplied), connect the two output jacks of the splitter (not supplied) to:
3 Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the IN jack on your VCR.
4 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
Connecting a TV, VCR, and Cable Box
✍DIGITAL CABLE BOX USERS: If you are connecting a digital cable box, you will need a special bi- directional splitter
Use this connection if you subscribe to a cable system that scrambles some channels (pay channels), but not all of them. This setup allows you to:
❏change channels through your cable box or VCR when you are receiving a scrambled signal
❏change channels through your TV
Rear of TV
1 | 3 | 4 |
S VIDEO
Connections
2b
1Splitter
Cable 2a
VCR
LINE
IN
VIDEO AUDIO L AUDIO R
LINE
OUT
3 |
4
VIDEO AUDIO L AUDIO R
LINE
OUT
| Y |
|
| P B |
|
|
| AUDIO OUT |
|
| (VAR/FIX) |
| P R |
|
VIDEO |
|
|
L | L | L |
(MONO) |
| (MONO) |
R | R | R |
|
| Video (yellow) |
|
| Audio L (white) |
|
| Audio R (red) |
13