Operating Instructions
Cable Box Connections
Some cable TV systems use scrambled or encoded signals that require a cable box to view all channels. If you subscribe to that kind of cable service, use this connection. Scrambled signals coming in to the TV through the cable box cannot be viewed in PIP. If some, but not all, of your channels are scrambled, consider using the cable box and cable connection (see page 13).
TV and Cable Box
1
From cable/ antenna
Cable box
Rear of TV
1 | 3 |
|
|
|
|
S VIDEO
2
VIDEO
L
(MONO)
R 
1 Connect the coaxial cable from your cable service to the IN jack on your cable box.
2 Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the VHF/UHF jack on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏Program your Sony remote control to operate your cable box (see page 5).
❏ To activate your remote press 
to operate your cable box and then use the 0 9 buttons or CH+/- buttons to change the channels. To do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31).
12