Using Basic Functions
Setting Up the TV
After you have finished connecting your TV, you can use Auto Program to set up your channels. During Auto Program, the TV will automatically search for available channels and program receivable channels.
✍ When you start Auto Program wait until it is finished; otherwise it will skip over channels that are available. Perform Auto Program again to program receivable channels.
1 Press 
to turn on the TV. The Initial Setup screen appears.
Initial Setup
Auto Program: [CH+]
Exit:[CH–]
First please connect cable/antenna
2 Press 
on the remote control or on the TV front panel to start Auto Program, or press
to exit.
✍The Initial Setup screen appears each time you turn on the TV until you perform Auto Program.
To perform Auto Program again |
|
|
| |||
1 | Press | . |
|
|
|
|
2 | Press g to highlight Channel Menu. |
|
|
| ||
3 | Press f to highlight Cable. Press | to select. |
|
| ||
4 | Press F or f to highlight On or Off according to how you connected your TV. Press | to | ||||
| select. |
|
|
|
|
|
5 | Press f to highlight Auto Program. Press | to search for channels. |
| |||
6 | After Auto Program finishes, press | to exit. |
| |||
To reset the TV to factory settings |
|
|
| |||
1 | Turn the TV on. |
|
|
| ||
2 | Hold down | on the remote control. |
|
| ||
3 | Press and release the POWER button on the TV front panel. The TV will turn itself off, |
| ||||
| then back on. |
|
|
| ||
4 | Release |
| . |
|
|
|
21