KV-G21L3
SECTION 4
SELF DIAGNOSIS FUNCTION
If no acknowledgement is returned from a device which is turned "ON", the device has a problem.
In this case, one of the LED's responding to the problem device will flicker a defined number of times.
Flickering is operated by lighting the LED's for 60ss each time.
The flickering frequency responding to each failed device is shown below.
| NONVOLATILE | — | Y/C JUNGLE | — | — | — | |
Device | MEMORY | ||||||
|
|
|
|
| |||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
Flickering | 1 | — | 3 | — | — | — | |
Frequency | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
All the devices are checked one after another from the left of the table.
If an error is found, the responding LED will start flickering.
So, if more than 1 device have failed, only the one on the left side will flicker.
– 18 –