Sony KV-G21L3 service manual Item Number 00, HSF H Shift

KV-G21L3

RM-883

5-3. A BOARD, ADJUSTMENT AFTER IC003	5-4. PICTURE DISTORTION ADJUSTMENT
(MEMORY) REPLACEMENT	Item Number 00 – 08

1. Enter to Service Mode.

00 HSF (H SHIFT)

2.Press commander buttons 5 and - (Data Initialize), and 2 and - (Data Copy) to initialize the data.

3.Call each item number, and check if the respective screen shows the normal picture.

In case some items are not well-adjusted, give them fine adjustment.

Write the data per each item number ([MUTING] + -).

4.Select item numbers and “31” (OP0), “32” (OP1) and “33” (OP2) and set the bit per model with command buttons 3and

6.

01 HSZ (H SIZE)

02PAP (PIN AMPLITUDE)

03CNP (CORNER PIN)

5. Press commander buttons 8 and - (Test Normal) to return all user adjustments to the data that was set on shipment from the factory. (= Cancel Service Mode.)

04 TLT (TILT)

05 VSL (V SLOPE)

06 VAP (V AMPLITUDE)

07 SCR (S CORRECTION)

08 VSF (V SHIFT)

– 23 –