Connections & Setup
Note:
If you're using an HD source (such as an HDTV tuner or HDTV satellite receiver) on the CMPNT or DVI input, you should run Auto convergence separately for that input as well. Tune to the input you’re using for the HD source, then go to page 48 for information on Auto convergence.
You don't need to run Auto convergence separately for the internal DVD player – the procedure for the TV covers the internal DVD player as well.
Complete Auto Channel Search
The next screen asks you to make sure you've connected the TV/DVD to a cable, satellite, or
In the Channel setup screen, you can launch the Auto channel search by pressing OK. The Auto channel search allows the TV/DVD to search for all channels viewable through your antenna or cable TV system. This is sometimes called auto programming. When the channel search is complete, press OK to access the List & Labels screen.
Changing Lists and Labels
The List & Labels part of the setup lets you edit your channel list and choose or create a personal
Note: Changing List and Labels can be time consuming. You can change these at a later time by accessing the Setup menu.
1.Press the left or right arrow to scroll through the channels and choose the one you want to edit.
2.Press the down arrow to highlight the In channel list option. Press the left or right arrow button to add (the box is checked) or remove (the box is unchecked) the channel from the list.
3.Press the down arrow to highlight the Channel label option. Press the left or right arrow button to scroll through the available list of 25 most common labels. The last option in the list allows you to create your own
4.Press the 1 or 2 number button to change the first letter of the label.
5.Press the right arrow to highlight the second letter, then press the 1 or 2 number button to change the second letter, etc.
6.When you are finished creating your label, press OK. Select Go back to go to the Auto Convergence menu.
Auto Convergence
Your TV/DVD’s picture tubes might have been disturbed during delivery or after you moved the TV/DVD, causing the color in your TV/DVD to be out of alignment. The colors adjust by starting auto convergence.
IMPORTANT: Auto convergence works best once the TV/DVD has warmed up for at least an hour. If you've just unpacked your TV/DVD, it's a good idea to repeat the Auto convergence function when the TV/DVD's been running for at least an hour. See page 48 for more information about Auto convergence.
1.Press OK to begin auto convergence.
2.When the auto convergence is complete, the Red center convergence menu appears. The cross in the middle of the screen should be yellow. If it is not, use the arrow buttons to move the red cross to overlap the green cross.
Press OK when adjustments are complete.
3.The Blue center convergence menu appears with a cyan cross in the middle of the screen. If it is not, use the arrow buttons to move the blue cross
to overlap the green cross. Press OK (the TV tunes to the last selected/ available channel in the channel list).
Chapter 1 | 15 |