Using the Remote Control
Component buttons
��� | ������ |
������ ��
How to Use the Remote After You’ve Programmed It
Because this universal remote can control several different components (TV, DVD, and a VCR, satellite receiver, etc.) it uses operational modes triggered by the component buttons. For example, if you want the remote to control the TV, you would press the TV button to put the remote into TV mode before you could control the TV.
1.Press the appropriate component button (AUX•HD, DVD, or TV) to set the remote to control the component.
2.Press ON•OFF to turn the component on or off.
3.Use the remote buttons that apply to that component.
Notes:
•The remote may not be compatible with all brands and models of components. It also may not operate all functions of the remote that came with your component.
•If you keep pressing buttons and nothing happens, the remote is probably in the wrong mode. You must press the component button that matches the component you want to operate (i.e., if you want to operate the DVD player, press DVD on the remote control to put the remote in DVD mode.)
Using the INPUT Button
Use the INPUT button to scroll through the available input channels and view components you have connected to the TV.
1.Press TV to place the remote in TV mode. Make sure the component you want to view is turned on.
2.Press INPUT to tune to an available input channel.
3.To return to the channel you were previously watching on TV, press CH+ or CH- button.
20 | Chapter 2 |