RCA MR29410 Connecting Cable TV, Antennas with 75-ohm Round Leads, Separate VHF and UHF Antennas

Page 10

1577575A.02 11/15/01 10:04 AM Page 2

I N S TA L L AT I O N

Antennas with 75-ohm Round Leads

1

Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a an optional combiner-adaptor (available at most electronics stores).

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1

Plug the incoming cable into the VHF/UHF antenna terminal on back of the TV.

▼ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

▼	This terminal might be labeled

“ANT OUT,” “VHF OUT,” or simply, “OUT.”

2.2 CHAPTER TWO: INSTALLATION

Image 10

Contents Television User’s Guide Changing entertainment. AgainPower Consumption 100-240V~50/60 Hz Important Safety Information Example Antenna Grounding Using the Remote InstallationYour New TV Operation Special FeaturesOther Information List of Features Familiarizing Yourself with the TVVideo Inputs 1 Side Panel JacksRear Panel Jacks Audio Inputs 1Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsAntennas with 75-ohm Round Leads Connecting Cable TVConnecting to a Cable Box that Descrambles All Channels Separate VHF and UHF AntennasConnecting to a Cable Box that Descrambles Some Channels ANT IN, VHF IN, or simply,Connecting a VCR Unplug the cable or antenna from the back of the TVConnecting a Camcorder Connecting a Second VCR to Record from the TVInstalling Batteries in the Remote Control Remote Control Buttons I N G T H E R E M O T EPlug & Play Feature Turning the TV On and OffViewing the Menus and On-Screen Displays Viewing the MenusSelecting a Menu Language Viewing the DisplaySelecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Labeling the Channels Fine Tuning Channels Troubleshooting Problem Possible SolutionUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications 1577575A.06 11/15/01 1039 AM 1577575A.06 11/15/01 1039 AM