RCA MR29410 manual Viewing the Menus and On-Screen Displays

1577575A.04 11/15/01 10:32 AM Page 2

O P E R AT I O N

4

Make sure that the antenna is connected to the TV and press or . The “Auto Program” is activated. Press MENU•PROG

to skip this step. (Refer to

“Auto program” on page 4.5.)

5

Press or to move to the hour or minute. Set the hour

or minute by pressing	or
. (Refer to “Setting the
clock” on page 4.8.)

6

When you have finished, press MENU•PROG button. The message “Enjoy your watching” is displayed.

Note: Plug & Play feature doesn’t work in the A/V mode.

▼ If you want to reset this feature
(1)	Press MENU•PROG button.
(2)	Press	three times to select the
Function menu and press .
(3)	Press	to select Plug & Play

and press .

The message “Plug & Play” is dis- played.

Viewing the Menus and On-Screen Displays

Viewing the Menus
1	▼ On-screen menus disappear
	from the screen after about thirty
With the power on,	seconds.
press MENU•PROG.

The main menu appears on the screen. Its left side has four icons: Picture, Sound, Channel, and Function.

2	▼ You can also use the MENU,
	CHANNEL, and VOLUME buttons
Use or to highlight one of the 4 icons. Then press to	on the control panel of the TV to

access the icon’s sub-menu. make selections.

3

Press MENU•PROG to exit.

4.2 CHAPTER FOUR: TV OPERATION