Connections & Setup
TIME |
|
Go Back |
|
Time Config. | ... |
Sleep Timer | 00:00 |
... | |
Schedule | ... |
TIME CONFIG |
|
Go Back |
|
Time | 08:25AM |
Set Time Access | Disabled... |
Time Offset | None.... |
Time Menu
This control panel lets you control several
Go Back Takes you to the previous menu.
Time Config. Takes you to the Time Configuration menu.
Go Back Takes you to the previous menu.
Time Displays the current time if the master user has set the time. If allowed by the master user, the basic user can set the time. Press OK to toggle between am and pm.
Set Time Access The master user selects who is able to set and change the current time:
Basic Basic users are able access the current time information and can make changes.
Disabled If the master user has set the time, the time information is available but cannot be changed.
Automatic Basic users are able to access the current time information but cannot make changes. With this option, if the master user doesn't set the time, the TV software will try to acquire time information from broadcasts that provide it.
Time Offset Sets an offset (from +12 to
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Sleep Timer Lets you set the TV to turn off after a given time. Press the right arrow to add 15 minutes to the clock (up to four hours).
Note: When the ClonePRO remote is used via the TV’s DSCI (Digital Serial Communications Interface) port to turn the TV on and off, Sleep Timer and
Schedule Lets you set the TV to turn on and off at specified times on a specified
Chapter 1 | 15 |