Connections & Setup
SOUND |
|
Go Back |
|
Sound Type | �� Mono... |
Balance |
|
Initial Volume |
|
Minimum Volume |
|
Maximum Volume |
|
Auto Vol Level |
|
Audio Output | Fixed... |
Volume Hold |
|
Sound Menu
Scroll to the feature you want to set. Use the right arrow button to change the setting.
Go Back Takes you to the previous menu.
Sound Type Plays the sound in Mono only.
Balance (Model J20F742 only) Set the balance to the left (there is no left speaker in the TV) in order to direct the sound to the pendant speaker. Set Sound Type to Mono.
Initial Volume Sets the TV’s volume to the specified level every time it is turned on.
Note: When the DSCI (Digital Serial Communications Interface) port is used to turn the TV on and off, Initial Volume settings are nonfunctional.
Minimum Volume
Maximum Volume
Auto Vol (Volume) Level Reduces volume blasts during commercial breaks. Eliminates the need to constantly adjust volume control. Set it On or Off. The default is Off.
Audio Output Lets you set the audio outputs to fixed, variable or zero level. Audio level changes with volume control or when it is fixed it doesn't change regardless of volume setting. The default is variable.
Volume Hold Turns the TV’s speakers on and sets the audio outputs proportional to the current volume setting. When this feature is turned on, mute and other volume controls are disabled.
Chapter 1 | 11 |